Characteristics of the ignition and combustion of biodiesel fuel spray injected by a common-rail injection system for a direct-injection diesel engine

Author:

Kuti O A1,Xiangang W G2,Zhang W1,Nishida K1,Huang Z H2

Affiliation:

1. Department of Mechanical Systems Engineering, University of Hiroshima, Higashi-Hiroshima, Japan

2. State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an, People's Republic of China

Abstract

The effect of injection pressures at 100 MPa and 200 MPa respectively on the ignition and combustion characteristics of biodiesel fuel spray injected by a common-rail injection system for a direct-injection diesel engine was investigated. Two biodiesel fuels (namely biodiesel fuel from palm oil (BDFp) and biodiesel fuel from cooking oil (BDFc)) and JIS#2 diesel fuel were utilized in this research. The Mie scattering technique was used to characterize both the non-evaporating and the evaporating spray formation processes. The OH chemiluminescence technique was used to determine the ignition and the lift-off length of the combusting flame. Two-colour pyrometry was applied for the soot formation processes. At all injection pressures, the biodiesel fuels (especially BDFp) gave a longer spray tip penetration and a smaller spray angle under the non-evaporating conditions while the liquid-phase penetration length was longer for the biodiesel fuels than for diesel under the evaporating conditions. From estimation using a simplified model for air entrainment by the sprays, the BDFp and BDFc exhibited lower mass ratios of air to fuel than diesel did. The ignition delay was longest for the BDFc while it was shortest for the BDFp. Both the experimental and the predicted flame lift-off lengths for the BDFp were the shortest, indicating the least percentage of entrained stoichiometric air upstream. There was no significant difference between the integrated and averaged KL factors at 100 MPa injection pressure for the BDFc and diesel fuels. At 200 MPa, the BDFc presented much lower integrated and averaged KL factors than diesel did. The averaged flame temperatures of the BDFc were found to be lower than that of diesel. The oxygen content in the BDFc played a significant role in the soot formation in comparison with the oxygen from the percentage of stoichiometric air entrained upstream of the lift-off length.

Publisher

SAGE Publications

Subject

Mechanical Engineering,Aerospace Engineering

Cited by 11 articles. 订阅此论文施引文献 订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3