The use of digital image correlation in a parametric study on the effect of edge distance and thickness on residual strains after hole cold expansion

Abstract

The paper presents the results of an experimental study that used digital image correlation to measure the residual strains created by hole cold expansion both before and after insertion of an interference fit fastener. The study used 7075-T6 aluminium test coupons with multiple fastener holes to more closely simulate a real aircraft structure where multiple fastener holes are often cold expanded sequentially and where the interactions between the holes are a function of both the hole-to-free-edge distance as well as the pitch between the fastener holes. Both hole-to-free-edge distance and coupon thickness were varied to measure their effects on residual strain after hole cold expansion and after hole cold expansion and interference fit fastener insertion. The results showed that as the edge distance was decreased, the tensile strains at the low edge side of the coupon increased exponentially for both thick (6.35 mm) and thin (1.59 mm) coupons.