Affiliation:
1. Nanyang Technological University School of Mechanical and Production Engineering Singapore
Abstract
It is known that a quasi-rigid-body mode (QR mode) exists in hard disk drives (HDDs) in the frequency range from 3 to 5 kHz and that it is caused by the flexibility of the pivot and the mass and structure of the head actuator assembly (HAA). This mode hinders performance improvement of the servo system in this bandwidth and thus limits the area density growth of HDDs. In this paper, a novel tuned damping device is proposed to suppress the QR mode and to reduce the residual vibration in head positioning in order to improve the servo system performance. The damping device is to be installed on the arm and hollow space within the voice coil motor (VCM) on the HDDs. The dynamic characteristics of the HAA with the tuned damping device are measured in both the frequency and the time domain and are analysed by finite element modelling (FEM). It is shown that the tuned damping device can work effectively to suppress quasi-rigid body vibration of the HAA and minimize the residual vibration in head positioning.
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献
1. Dynamics and control performance of hard disk drives with passive dampers;Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science;2004-12-01
2. Smart materials and structures—a finite element approach—an addendum: a bibliography (1997–2002);Modelling and Simulation in Materials Science and Engineering;2003-07-02
3. MODAL TESTING AND FINITE ELEMENT MODELLING OF SUBSYSTEM IN HARD DISK DRIVE;Mechanical Systems and Signal Processing;2003-07