Prediction and computer simulation of dynamic thrust and torque in vibration drilling-Reference-Cited by-同舟云学术

Prediction and computer simulation of dynamic thrust and torque in vibration drilling

Published:1998-06-01 Issue:6 Volume:212 Page:489-497
ISSN:0954-4054
Container-title:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
language:en
Short-container-title:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Author:

Wang L-P¹,Wang L-J²,He Y-H²,Yang Z-J²

Affiliation:

1. Research Institute of Engineering Information and Intelligent Technology School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan, People's Republic of China

2. Jilin University of Technology Department of Mechanical Engineering Changchun, People's Republic of China

Abstract

A predictive model for dynamic thrust and torque in vibration drilling is presented. The model is based on the mechanics of vibration cutting analysis, assuming that the deformation process at the lips and chisel edge is treated as a number of vibration cutting elements, each with different dynamic characteristics. The result of a simulation study conducted for a low frequency range has shown a very good agreement between the theoretical predictions and the experimental evidence.

Publisher

SAGE Publications

Subject

Industrial and Manufacturing Engineering,Mechanical Engineering

Link

http://journals.sagepub.com/doi/pdf/10.1243/0954405981515798

Reference12 articles.

1. Investigation into Drilling Laminated Printed Circuit Board Using a Torque-Thrust-Temperature Sensor

2. Kumabe J. Vibration Cutting, 1977, pp. 310–323 (Practice Education Publishing Company, Tokyo).

3. Burrless Drilling by Means of Ultrasonic Vibration

Cited by 26 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Thrust force model for ultrasonic-assisted micro drilling of DD6 superalloy;Advances in Manufacturing;2022-01-04

2. Kinematic analysis and process stability of ultrasonic-assisted drilling;The International Journal of Advanced Manufacturing Technology;2021-05-20

3. Effects of delamination in drilling glass/polyester composite;Frontiers of Structural and Civil Engineering;2021-04-28

4. Exit burr height mechanistic modeling and experimental validation for low-frequency vibration-assisted drilling of aluminum 7075-T6 alloy;Journal of Manufacturing Processes;2020-08

5. Drilling force model for forced low frequency vibration assisted drilling of Ti-6Al-4V titanium alloy;International Journal of Machine Tools and Manufacture;2019-11