Affiliation:
1. Азербайджанский медиицинский университет
2. Azerbaijan Medical University
Abstract
Subject. Ceramic-metal prostheses are distinguished by high wear resistance, resistance to deformation, and tight fit to the gums. However, there are relatively large differences in determining the success / survival of cobalt chromium based restorations. The article presents the results of a study of cobalt-chromium fixed dentures.
Objectives — evaluate the effectiveness of cobalt-chromium fixed dentures made using the direct metal laser sintering (DMLS) technique.
Material and methods. 32 patients (mean age 41.8 ± 2.46 years) were found to have 54 fixed cobalt-chromium fixed bridges made using direct laser sintering of metals. Dentures were evaluated between 6, 12, 24, 36 months according to G. Ryge criteria. The survival rate of restorations is calculated according to Kaplan-Meyer.
Results. Assessment of fixed prostheses revealed the absence of criteria C and D in all 3 categories. A comparative analysis of prostheses showed no change in the period 6, 12, 24 months. After 36 months, chips that did not violate the function of the prosthesis were revealed in 5.5 % of cases, visible signs of a cleft in the category of “marginal adaptation” in 1.8 % of cases, edge discoloration of the surface in 3.7 % of cases. Radiographically, 1 patient showed signs of incipient proximal caries and periapical changes, respectively. During the study period of 6-24 months. survival rate was 1.0. The survival of the restoration over a 3-year period was 88.9 %.
Conclusion. The frequency of cleavage was 5.5 %, which is comparable to the usual performance of ceramic-metal restorations. The visible signs of a cleft in the regional adaptation was 1.8 %, and the regional color mismatch was 3.7 %. 1.8 % of restoration was detected. Signs of incipient proximal caries were 1.8 %, periapical changes — 1.8 %. Survival was 88.9 %.
Reference25 articles.
1. Gunsoy, S. Evaluation of marginal/internal fit of chrome-cobalt crowns: Direct laser metal sintering versus computer-aided design and computer-aided manufacturing / S. Gunsoy, M. Ulusoy // Niger J Clin Pract. – 2016. – Vol. 19. – P. 636–644. DOI: 10.4103/1119-3077.188699, Gunsoy, S., Ulusoy, M. (2016). Evaluation of marginal/internal fit of chrome-cobalt crowns: Direct laser metal sintering versus computer-aided design and computer-aided manufacturing. Niger J Clin Pract, 19, 636–644. DOI: 10.4103/1119-3077.188699
2. Suleiman, S. H. Fracture strength of porcelain fused to metal crowns made of cast, milled or laser-sintered cobalt-chromium / S. H. Suleiman, P. Vult von Steyern // Acta Odontol Scand. – 2013. – Vol. 71. – P. 1280–1289. doi: 10.3109/00016357.2012.757650, Suleiman, S. H., Vult von Steyern, P. (2013). Fracture strength of porcelain fused to metal crowns made of cast, milled or laser-sintered cobalt-chromium. Acta Odontol Scand, 71, 1280–1289. doi: 10.3109/00016357.2012.757650
3. Eliasson, A. A clinical evaluation of cobalt chromium metal ceramic fixed partial dentures and crowns: A three to seven year retrospective study / A. Eliasson, C. Amelund, A. Johansson // J Prosthet Dent. – 2007. – Vol. 98. – P. 6–16., Eliasson, A., Arnelund, C., Johansson, A. (2007). A clinical evaluation of cobalt chromium metal ceramic fixed partial dentures and crowns: A three to seven year retrospective study. J Prosthet Dent, 98, 6–16.
4. Махмудов, М. М. Индексные и гидродинамические показатели тканей пародонта ка критерий результативности лечения травматического поражения тканей пародонта конструкциями зубных протезов / М. М. Махмудов, Г. Г. Ашуров // Проблемы стоматологии. – 2018. – № 13 (2). – С. 64–68., Makhmudov, M. M., Ashurov, G. G. (2018). Indeksnyye i gidrodinamicheskiye pokazateli tkaney parodonta ka kriteriy rezul'tativnosti lecheniya travmaticheskogo porazheniya tkaney parodonta konstruktsiyami zubnykh protezov [Index and hydrodynamic indicators of periodontal tissues as a criterion for the effectiveness of the treatment of traumatic lesions of periodontal tissues with dental prosthesis designs]. Problemy stomatologii [Dental problems], 13 (2), 64–68. (In Russ.)
5. Куркина, В. М. Значение металлокерамических конструкций в ортопедической стоматологии / В. М. Куркина // Научное обозрение. Медицинские науки. – 2017. – № 4. – С. 42–46., Kurkina, V. M. (2017). Znacheniye metallokeramicheskikh konstruktsiy v ortopedicheskoy stomatologii [The value of ceramic-metal constructions in orthopedic dentistry]. Nauchnoe obozrenie. Meditsinskie nauki [Scientific Review. Medical sciences], 4, 42–46. (In Russ.)