Affiliation:
1. School of Optometry and Vision Science University of New South Wales Sydney New South Wales Australia
Abstract
AbstractBackgroundIn the development of eye and face protection standards against biological hazards, it is important to consider that the eye and face protectors may be used in the outdoor environment, where ultraviolet (UV) exposure from the sun is much higher than indoors. Workers affected include paramedics, ambulance officers and clinical testing personnel.MethodsSpectral transmittances (280–780 nm) were measured on eight face shields and one goggle of the types used in hospital and clinical environments, three overhead projector sheets and an occupational impact protective goggle. The UV and luminous transmittances were calculated according to the international and two national sunglass standards, and compared with the compliance requirements.ResultsAll the face shields and goggle lenses were made of variants of the same material. All the samples, including the overhead projector sheets, complied with the requirements of the sunglass standards (for normal conditions, in the case of the American standard).ConclusionSince all the lenses complied with the sunglass standards for UV protection, and there appears to be uniformity in the choice of materials in this product type, there is no need to make provision, as is the case for occupational eye and face protection standards, for protectors that do not provide UV protection. This makes labelling and advice to end users from eyecare and safety professionals much simpler.