Experimental study on moisture diffusivity, activation energy, and mathematical modeling of drying kohlrabi under different solar drying methods

Abstract

AbstractThe assessment and enhancement of any drying system for optimal drying processes relies on critical parameters, namely moisture diffusivity and activation energy. In this study, medicinally beneficial kohlrabi of 40‐mm diameter and 6‐mm thickness samples were dried under three different drying methods, namely open sun drying (OSD), natural air‐circulation mode (NACM) single slope direct solar dryer (SSDSD), and forced air‐circulation mode (FACM) SSDSD. The experimental results showed that the drying chamber operating temperature and air velocity played significant roles in the moisture diffusion process and activation energy required to dry the kohlrabi sample. The FACM exhibited the highest average moisture diffusivity values at 7.29 × 10−10 m2/s, surpassing both NACM (5.65 × 10−10 m2/s) and OSD (3.28 × 10−10 m2/s). The activation energy needed for the drying process was the lowest in FACM at 27.44 kJ/mol, followed by NACM at 31.37 kJ/mol and OSD at 35.29 kJ/mol. This is due to the uniform temperature distribution and high airflow rate in the case of FACM. Additionally, 10 thin‐layer models were tested for all three experimental conditions. The statistical analysis showed that for OSD and NACM, the Midilli et al. model, and for FACM, the Page model was best suited for representing drying kinetics with lowest χ2 and root mean square error and highest R2 values. Furthermore, the energy and exergy assessment guaranteed an evaluation of the solar drying system's efficiency.Practical applicationsThis research provides valuable insights into optimizing solar drying methods for kohlrabi preservation. Understanding how temperature and air velocity influence moisture diffusivity and activation energy allows practitioners to enhance drying efficiency. Forced air‐circulation mode (FACM) single slope direct solar dryer (SSDSD) emerges superior, with higher moisture diffusivity and lower activation energy. The study also identifies appropriate drying kinetics models for each method, aiding the accurate prediction of drying behavior. Emphasizing efficiency, the research highlights FACM's superior thermal efficiency and natural air‐circulation mode's higher exergetic efficiency. These insights empower practitioners to make informed decisions, potentially improving agricultural product preservation, reducing energy consumption, and promoting sustainability. Moreover, the research's findings hold significant implications for industrial food processing and preservation applications, suggesting the direct implementation of optimized solar drying techniques in large‐scale settings for kohlrabi and similar agricultural products.