Calibration of the DC Resistance from 10MΩ to 10TΩ with Dual Source Bridge Type High Precision High Resistance Measuring Instrument-Reference-Cited by-同舟云学术

Calibration of the DC Resistance from 10MΩ to 10TΩ with Dual Source Bridge Type High Precision High Resistance Measuring Instrument

Published:2024-07-01 Issue:7 Volume:144 Page:245-251
ISSN:0385-4205
Container-title:IEEJ Transactions on Fundamentals and Materials
language:en
Short-container-title:The transactions of the Institute of Electrical Engineers of Japan.A

Author:

Soya Hayato¹²,Oe Takehiko³,Someya Takashi¹,Kaneko Nobu-Hisa³

Affiliation:

1. Precision Electronics And Aviation Technology Department,Nagano Prefecture General Industrial Technology Center

2. Department of Applied Information Engineering, Faculty of Engineering, Suwa University of Schience

3. Research Institute for Physical Measurement, National Institute of Advanced Industrial Science and Technology (AIST), National Metrology Institute of Japan (NMIJ)

Publisher

Institute of Electrical Engineers of Japan (IEE Japan)

Link

https://www.jstage.jst.go.jp/article/ieejfms/144/7/144_245/_pdf

Reference11 articles.

1. (1) K. M. Yu, D. G. Jarrett, A. F. Rigosi, S. U. Payagala, and M. E. Kraft: “Comparison of Multiple Methods for Obtaining PΩ Resistances With Low Uncertainties”, IEEE Trans. Instrum. & Meas., Vol. 69, No. 6, pp. 3729-3738 (2020)

2. (2) D. G. Jarrett: “Automated Guarded Bridge for Calibration of Multimegohm Standard Resistors from 10 MΩ to 1 TΩ”, IEEE Trans. Instrum. & Meas., Vol. 46, No. 2, pp. 325-328 (1997)

3. (3) G. Rietveld and J. H. N. van der Beek: “Automated High-Ohmic Resistance Bridge with Voltage and Current Null Detection”, IEEE Trans. Instrum. Meas., Vol. 62, No. 6, pp. 1760-1765 (2013)

4. (4) B. Jeckelmann, et al.: “Final report on supplementary comparison EURAMET. EM-S32: Comparison of resistance standards at 1 TΩ and 100 TΩ”, Metrologia, Vol. 50, Issue 1A, 01008 (2013)

5. (5) T. Someya, N. Takane, and S. Koyano: “Future Technology for Power System Analysis”, Research Reports of Nagano Prefecture General Industrial Technology Center, No. 14, pp. 45-47 (2019) (in Japanese)