Strength development of cemented tailings materials containing polycarboxylate ether-based superplasticizer: experimental results on the effect of time and temperature

Abstract

Superplasticizers are widely used in the backfill industry for the improvement of the flow ability of cemented paste backfill (CPB) while keeping water content low. However, the coupled effects of temperature and curing time on the mechanical strength of CPB with superplasticizers are poorly understood. This paper presents new findings of research conducted to experimentally assess the effects of a polycarboxylate-based superplasticizer on the strength of CPB subjected to varying curing time (1, 3, 7, and 28 days) and temperature (2 °C, 20 °C, and 35 °C). The binders used were Portland cement type I, fly ash, and blast furnace slag. Superplasticizer contents of 0, 0.125, and 0.25 percent of the total weight of the CPB were added. Various microstructural analyses and monitoring programs were also conducted to understand the principles behind the patterns in the strength of different CPB samples. The results obtained show that the unconfined compressive strength (UCS) of the CPB containing polycarboxylate-based superplasticizer increases with time. Moreover, the increase in superplasticizer content was observed to improve the UCS of the CPB (0.25% > 0.125% > 0%). The temperature was also observed to play an important role in strength development as the UCS increases with the rise in the curing temperature for all samples. It is also found that the temperature-induced strength increase is more significant for the CPBs that contain the superplasticizer than for those without superplasticizer. It was also observed that the CPB containing superplasticizer maintained a relatively similar strength upon replacing the cement with 50% slag while showing a sharp decline with fly ash. The findings from this study will be useful towards a cost-effective design of backfill structures.