Affiliation:
1. School of Civil and Environmental Engineering, University of Technology Sydney, Ultimo NSW 2007, Australia
2. Department of Civil Engineering, Indian Institute of Technology Bombay, Mumbai 400076, India
Abstract
Previous studies have explored using scrap rubber in constructing the ballasted track and showed tremendous potential to mitigate noise and vibration. However, its application for slab tracks has not been extensively investigated. This study intends to utilise scrap rubber in the base layer of the slab track; however, the high stress below base layer of the slab track may render its use unsuitable. The addition of scrap rubber would improve the damping performance but reduce the elastic modulus and cause excessive settlement of the track. This paper utilises an experimental programme comprising static and cyclic triaxial testing and numerical analyses to assess the suitability of four mixes, e.g., mix-A (soil), mix-B (soil mixed with rubber), mix-C (polyurethane-treated soil), and mix-D (polyurethane-treated soil mixed with rubber), as a base layer in slab tracks. The laboratory investigations reveal that the best performance in terms of improved damping ratio and resilient modulus, and lowered excess pore water pressure and vertical strains are shown by mix-D. These experimental test findings were supplemented with the results from three-dimensional full-scale finite element analyses, which showed a drastic reduction in the vibration levels of the track with mix-D as a base layer instead of conventional lean-mix concrete.
Publisher
Canadian Science Publishing
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献