Rock slope stability and distributed joint systems

Abstract

A deterministic (GEOSLIDE) and a probabilistic (PROSLIDE) microcomputer code are introduced to aid in performing rock wedge analyses based on the limit equilibrium method. The deterministic code evaluates the stability of a single rock wedge formed by discontinuities in rock through three-dimensional vector algebra, GEOSLIDE undertakes a full kinematic analysis (daylighting and obstruction), analyzes both wedge and plane sliding, and provides for anchor designs and sensitivity analyses (cohesion, friction, and water forces). Through multiple stability analyses, PROSLIDE evaluates the probability of failure for a rock slope by examining the distribution of the factors of safety from all the potential sliding wedges formed by the discontinuities of the rock mass. The probability of failure is expressed as the ratio of kinematically free wedges that have a factor of safety less than unity to the total number of wedges, PROSLIDE can form and analyze as many as 2000 different pairs of discontinuities in less than 30 min using a 25 MHz 486 IBM-compatible computer. In a worked example, the probability of failure for a fixed slope strike and loading condition is shown to vary with the slope angle, following the characteristic 'S' shape of a cumulative distribution function. The effect of an anchor force is to spread the distribution over a wider range of the factor of safety (SF), pushing many wedges into a potential upslide situation and splitting the distribution about the failure zone of the stability diagram (−1 < SF < 1). Key words : rock slope, rock wedge, stability analysis, factor of safety, probability of failure, Monte Carlo simulation.