An Experimental Examination of the Loss-of-Flow Accident Phenomenon for Prototypical ITER Divertor Channels ofY= 0 andY= 2-Reference-Cited by-同舟云学术

An Experimental Examination of the Loss-of-Flow Accident Phenomenon for Prototypical ITER Divertor Channels ofY= 0 andY= 2

Published:2000-01 Issue:1 Volume:37 Page:38-53
ISSN:0748-1896
Container-title:Fusion Technology
language:en
Short-container-title:Fusion Technology

Author:

Marshall Theron D.¹,McDonald Jimmie M.²,Cadwallader Lee C.³,Steiner Don⁴

Affiliation:

1. Rensselaer Polytechnic Institute Nuclear Engineering Department, Troy, New York 12180

2. Sandia National Laboratories Fusion Technology Department, MS-1129, P.O. Box 5800 Albuquerque, New Mexico 87185

3. Idaho National Engineering and Environmental Laboratory Fusion Safety Program, MS-3860, P.O. Box 1625, Idaho Falls, Idaho 83415

4. Rensselaer Polytechnic Institute Environmental and Energy Engineering Department, Troy, New York 12180

Publisher

Informa UK Limited

Subject

General Engineering

Link

https://www.tandfonline.com/doi/pdf/10.13182/FST00-A120

Reference5 articles.

1. “Reactor Safety Study,” Appendix II, WASH-1400, U.S. Nuclear Regulatory Commission (1975).

2. T. D. MARSHALL and L. C. CADWALLADER, “InVessel ITER Tubing Failure Rates for Selected Materials and Coolants,” EGG-FSP-10928, Idaho National Engineering Laboratory (1994).

3. Experience with high heat flux components in large tokamaks

4. T. D. MARSHALL, “Experimental Examination of the Post-Critical Heat Flux and Loss of Flow Accident Phenomena for Prototypical ITER Divertor Channels,” PhD Thesis, Rensselaer Polytechnic Institute (1998).

5. T. D. MARSHALL, R. D. WATSON, J. M. McDONALD, L. S. WOLD, D. L. YOUCHISON, and L. C. CADWALLADER, “Experimental Time to Burnout of a Prototypical ITER Divertor Plate During a Simulated Loss of Flow Accident,” SAND96-2611, Sandia National Laboratories (1997).

Cited by 7 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. ADRANOS: A numerical tool developed to analyse coolant operating conditions of the EU-DEMO divertor;Fusion Engineering and Design;2023-12

2. Thermal Hydraulic Modeling and Analysis of Fusion Reactors Plasma Facing Components Using Alumina Nanofluids;Journal of Thermal Science and Engineering Applications;2017-03-21

3. Thermal analysis of new ITER FW and divertor design during VDE energy deposition;Fusion Engineering and Design;2013-03

4. Analysis, verification, and benchmarking of the transient thermal hydraulic ITERTHA code for the design of ITER divertor;Fusion Engineering and Design;2010-08

5. Transient thermal hydraulic modeling and analysis of ITER divertor plate system;Fusion Engineering and Design;2009-12