Economic Evaluation of Polymer Flood Field Test in Heavy Oil Reservoir on Alaska North Slope

Abstract

Abstract Since August 2018, a polymer flooding field pilot has been underway in an unconsolidated heavy oil reservoir on the Alaska North Slope (ANS). Previously, a reservoir simulation model was constructed and calibrated to predict the oil recovery of the field test; it demonstrated that polymer flooding is technically feasible to significantly improve oil recovery from heavy oil reservoirs on the Alaska North Slope. However, the economic performance of the pilot, critical to determining its success, has not been investigated, which is another key metric used in assessing the overall performance of the field pilot. Therefore, this study focuses on evaluating the project's economic performance by integrating the calibrated simulation model with an economic model. The investigation results demonstrate that the project value remains profitable for all polymer flood scenarios at conservative economic parameters. Thus, the use of polymer flooding over waterflooding is attractive. However, the predicted value changes meaningfully between the scenarios, emphasizing that a simulation model should be taken as a "living forecast". Subsequently, an economic sensitivity analysis is conducted to provide recommendations for continued operation of the ongoing field pilot and future polymer flood designs. The results indicate that a higher polymer concentration can be injected due to the development of fractures in the pilot reservoir. The throughput rate should remain high without exceeding operating constraints. A calculated point-forward polymer utilization parameter indicates a decreasing efficiency of the polymer flood at later times in the pattern life. Future projects will benefit from starting polymer injection earlier in the pattern life. A pattern with tighter horizontal well spacing will observe a greater incremental benefit from polymer flooding. This case study provides important insight for the broader discussion of polymer flood design from the economic perspective. It illustrates how expectations for performance may change as additional data is collected. It also formalizes the concept of "point-forward utilization" to evaluate the incremental efficiency of additional chemical injection.