Manipulation of resonance orders and absorbing materials for structural colors in transmission with improved color purity

Abstract

We present an improved color purity of additive transmissive structural color filters by controlling a resonance order and by inserting a highly absorbing material. The proposed structure consists of a single metal sandwiched by two transparent dielectric media serving as a cavity to minimize the ohmic loss in the metal mirrors, which is distinctly different from a conventional Fabry-Perot (FP) cavity that is in general designed to have two metal mirrors. Low reflections at an air-dielectric interface cause a quality-factor of a resonance to be reduced, causing a degraded color purity, which can be improved by employing a 1st order resonance that exhibits a narrower bandwidth than a fundamental FP resonant mode (0th order). For a red color with the improved purity, introducing an ultrathin absorbing layer in the middle of a top cavity enables the 1st resonance to be trivially influenced while selectively suppressing a 2nd order resonance appearing at the shorter wavelength region. Moreover, angle-insensitive performances up to 60° are attained by utilizing a cavity material with high index of refraction. Besides, the fabrication of the structural coloring devices involves a few deposition steps, thus rendering the approach suitable for applications over the large area. The described concept could be applied to diverse applications, such as colored solar panels, sensors, imaging devices, and decorations.