Three-dimensional stitching of stereo-deflectometry based on marker points

Abstract

As a non-contact and three-dimensional (3D) mirror surface measurement method, stereo-deflectometry has been developing rapidly in recent years. For solving the problem of the measurement of large surface inclination with traditional stereo-deflectometry, 3D stitching of stereo-deflectometry based on marker points is proposed. In this method, the 3D points in the subregions under different perspectives were measured. Meanwhile, the 3D coordinates of the marker points on the sample table, which were calculated by binocular stereo vision, were used for coarse stitching, and the ICP algorithm was used for fine stitching. In order to verify the 3D stitching algorithm, we built a measurement system for the freeform surface of an ultra-short lens with a diameter of about 100 mm and a steepness of 52.6°. The spherical fitting error of the reflective bowl after stitching is within 60 mm. The experimental results verify the feasibility of the method, leading to potential mass application of stereo-deflectometry in 3D measurement of complex optical surfaces with a large aperture and high steepness.