Determination of the through-thickness residual stress in thick duplex stainless steel welded plate by wavelength-dependent neutron diffraction method-Reference-Cited by-同舟云学术

Determination of the through-thickness residual stress in thick duplex stainless steel welded plate by wavelength-dependent neutron diffraction method

Published:2022-04 Issue: Volume:196 Page:104603
ISSN:0308-0161
Container-title:International Journal of Pressure Vessels and Piping
language:en
Short-container-title:International Journal of Pressure Vessels and Piping

Author:

Jiang Wenchun,Wan Yu,Tu Shan-Tung,Wang Huamiao,Huang Yalin,Xie Xuefang,Li Jian,Sun Guangai,Woo Wanchuck

Publisher

Elsevier BV

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science

Reference48 articles.

1. Finite element analysis of residual stress distribution in a thick plate joined using two-pole tandem electro-gas welding;Hwang;J. Mater. Process. Technol.,2016

2. Evaluation of through-thickness residual stresses by neutron diffraction and finite-element method in thick weld plates;Jiang;J. Pressure Vessel Technol.,2017

3. Estimation of residual stresses in an 800mm thick steel submerged arc weldment;Mitra;J. Mater. Process. Technol.,2016

4. The effect of chemical composition and annealing condition on the microstructure and tensile properties of a resource-saving duplex stainless steel;Pan;Mater. Sci. Eng.,2020

5. Evaluation of pitting corrosion in duplex stainless steel Fe20Cr9Ni for nuclear power application;Chen;Acta Mater.,2020

Cited by 23 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Mechanical and high-temperature characterization of additively manufactured Ni-superalloys at SALSA neutron strain diffractometer;Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment;2024-10

2. Atomic-scale compositional complexity ductilizes eutectic phase towards creep-resistant Al-Ce alloys with improved fracture toughness;Acta Materialia;2024-09

3. Neutron Diffraction Measurements of Residual Stresses for Ferritic Steel Specimens over 80 mm Thick;Metals;2024-05-28

4. Effect of Tube Arrangement on the Welding of the Tube-to-Tubesheet Joint of Shell-and-Tube Heat Exchangers Using the Finite Element Method;Journal of Materials Engineering and Performance;2024-05-08

5. Research progress of residual stress measurement methods;Heliyon;2024-04