Recommendations for a modification of ASTM E 1457 to include creep-brittle materials-Reference-Cited by-同舟云学术

Recommendations for a modification of ASTM E 1457 to include creep-brittle materials

Published:1999-01 Issue:1 Volume:62 Page:123-142
ISSN:0013-7944
Container-title:Engineering Fracture Mechanics
language:en
Short-container-title:Engineering Fracture Mechanics

Author:

Schwalbe Karl-Heinz,Ainsworth Robert A,Saxena Ashok,Yokobori Takeo

Publisher

Elsevier BV

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science

Reference24 articles.

1. Ainsworth RA. Characterisation of creep fracture at interfaces in weldments. In: Proceedings of ICF9. Pergamon, Oxford, 1997. 1. p. 143–153

2. Creep crack growth in 1/2Cr–Mo–V steel at 838 K, I: behaviour at a constant load;Neate;Mater Sci Engng,1986

3. The variation of the stress singularity at the notch tip with notch angle and radius of curvature;Awaiji;Comput Struct,1986

4. Fuji A, Tabuchi M, Yokobori Jr AT, Yokobori T. Influence of notch shape and geometry during creep crack growth testing of Ti–Al intermetallic compounds. Engng Fract. Mech. (this issue)

5. Fatigue precracking and fracture toughness testing of TiAl intermetallics;Dogan;Intermetallics,1995

Cited by 23 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Creep Cracking;Reference Module in Materials Science and Materials Engineering;2017

2. Experimental investigation of creep crack growth behavior in nickel base superally by constant displacement loading method at elevated temperature;Materials Science and Engineering: A;2016-05

3. HIGH-TEMPERATURE FRACTURE MECHANICS: A COMPREHENSIVE EXAMINATION WITH A CRITICAL REVIEW;Composites: Mechanics, Computations, Applications, An International Journal;2011

4. Influence of the modes of operation and structural factors on the crack propagation in 12Cr–2Ni–Mo steel;Strength of Materials;2009-05

5. Theoretical-experimental model for predicting crack growth rate in structural alloys under combined action of fatigue and creep;Strength of Materials;2009-01