Stress corrosion cracking of fusion boundary for 316L/52M dissimilar metal weld joints in borated and lithiated high temperature water-Reference-Cited by-同舟云学术

Stress corrosion cracking of fusion boundary for 316L/52M dissimilar metal weld joints in borated and lithiated high temperature water

Published:2017-05 Issue: Volume:120 Page:219-230
ISSN:0010-938X
Container-title:Corrosion Science
language:en
Short-container-title:Corrosion Science

Author:

Zhu Ruolin,Wang Jianqiu,Zhang Zhiming,Han En-Hou

Funder

Key Research Program of Frontier Sciences, CAS

National Natural Science Foundation of China

Publisher

Elsevier BV

Subject

General Materials Science,General Chemical Engineering,General Chemistry

Reference44 articles.

1. Characterization of defects in alloy 152, 52 and 52 M welds;Bruemmer,2009

2. Residual strain measurement and grain boundary characterization in the heat-affected zone of a weld joint between Alloy 690TT and Alloy 52;Hou;J. Nucl. Mater.,2010

3. Environmentally-assisted cracking behaviour in the transition region of an Alloy182/SA 508 Cl.2 dissimilar metal weld joint in simulated boiling water reactor normal water chemistry environment;Seifert;J. Nucl. Mater.,2008

4. Development of crack growth rate disposition curves for primary water stress corrosion cracking (PWSCC) of alloy 82,182, and 132 weldments;White,2006

5. Microstructure, local mechanical properties and stress corrosion cracking susceptibility of an SA508-52M-316LN safe-end dissimilar metal weld joint by GTAW;Ming;Mater. Sci. Eng. A,2016

Cited by 32 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Macroscopic and microscopic element distribution in transition zones of GTAW Alloy 52M weld joint and its PWSCC growth behaviour;Journal of Nuclear Materials;2024-12

2. Microstructure and hydrogen-induced stress corrosion cracking behaviour of U75V flash-welded joints in high-speed railways;Corrosion Science;2024-11

3. Effect of cold work level on the crack propagation behaviour of 316LN stainless steel in high-temperature pressurized water;Journal of Nuclear Materials;2024-09

4. Evaluation of the stress corrosion crack growth behaviour of high-strength marine steel based on model of crack tip mechano-electrochemical effect;Journal of Materials Science & Technology;2024-08

5. Ameliorating dilution of Cr and Ni and improving PWSCC resistance of 52 M overlay by hot wire plasma arc cladding;Journal of Materials Research and Technology;2024-07