Comprehensive analysis of tool wear, tool life, surface roughness, costing and carbon emissions in turning Ti–6Al–4V titanium alloy: Cryogenic versus wet machining-Reference-Cited by-同舟云学术

Comprehensive analysis of tool wear, tool life, surface roughness, costing and carbon emissions in turning Ti–6Al–4V titanium alloy: Cryogenic versus wet machining

Published:2021-01 Issue: Volume:153 Page:106597
ISSN:0301-679X
Container-title:Tribology International
language:en
Short-container-title:Tribology International

Author:

Agrawal Chetan,Wadhwa Jwalant,Pitroda Anjali,Pruncu Catalin Iulian,Sarikaya Murat,Khanna Navneet

Funder

Science and Engineering Research Board

Publisher

Elsevier BV

Subject

Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering,Mechanics of Materials

Reference51 articles.

1. Comparative assessment of the mechanical and electromagnetic surfaces of explosively clad Ti–steel plates after drilling process;Nieslony;Precis Eng,2017

2. Tool wear and hole quality evaluation in cryogenic Drilling of Inconel 718 superalloy;Khanna;Tribol Int,2020

3. The effect of addition of hBN nanoparticles to nanofluid-MQL on tool wear patterns, tool life, roughness and temperature in turning of Ni-based Inconel 625;Yıldırım;Tribol Int,2019

4. Terminology to support manufacturing process characterization and assessment for sustainable production;Garretson;J Clean Prod,2016

5. Transforming our world: implementing the 2030 agenda through sustainable development goal indicators;Lee;J Publ Health Pol,2016

Cited by 134 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. In pursuit of sustainability in machining titanium alloys using phosphonium-based halogen-free ionic liquids as potential metalworking fluid additives;Tribology International;2024-11

2. Optimal lubricating protection and interfacial behavior for titanium alloy surface from phosphorus-based ionic liquids;Tribology International;2024-11

3. Prediction of surface roughness using different features in vortex cooled turning process of Ti6Al4V alloy;Measurement;2024-09

4. Effect of cryogenic duration on the tribological properties of sintered polycrystalline c-BN during sliding mating materials in vacuum;Ceramics International;2024-09

5. Exploring cryo-MQL medium for hard machining of hastelloy C276: a multi-objective optimization approach;International Journal on Interactive Design and Manufacturing (IJIDeM);2024-08-31