Affiliation:
1. ÇANAKKALE ONSEKİZ MART ÜNİVERSİTESİ
2. KIRŞEHİR AHİ EVRAN ÜNİVERSİTESİ
Abstract
Mechanical properties of rocks such as uniaxial compressive strength, tensile strength, shear strength are the properties that determine their behavior under load. These properties of rocks are often determined by difficult, complex, time-consuming and expensive test methods. Therefore, instead of determining these properties directly, these properties can be estimated indirectly by using relatively inexpensive, fast and easily applicable methods. The surface hardness parameter of Schmidt hammer rebound hardness is fast, inexpensive, and easy to apply to determine the hardness of rocks and concrete. It is also used to indirectly determine the mechanical properties of rocks. It is seen that two different types of hammers (N-type and L-type) with different impact energies are commonly used in the literature. In this study the correlations between the surface hardness of different rocks obtained using N-type and L-type Schmidt hammers were analyzed. For this purpose, data were compiled from studies in the literature, which included both N-type and L-type Schmidt hammer rebound hardness of different rock types, and the collected data were analyzed statistically. Coefficients have been proposed for the conversion of N-type and L-type Schmidt hammer rebound hardness to each other.
Funder
Bu çalışma KAYAMEK'2022 Sempozyumunda sözlü olarak sunulmuştur.
Publisher
Muhendislik Bilimleri ve Tasarim Dergisi
Subject
Colloid and Surface Chemistry,Physical and Theoretical Chemistry
Reference35 articles.
1. Akbay, D., Altındağ, R., 2020. Reliability and evaluation of point load index values obtained from different testing devices. Journal of the Southern African Institute of Mining and Metallurgy, 120, 181–90.
2. Aladejare, A.E., 2020. Evaluation of empirical estimation of uniaxial compressive strength of rock using measurements from index and physical tests. Journal of Rock Mechanics and Geotechnical Engineering,12, 256–68.
3. Asteris, P.G., Mamou, A., Hajihassani, M., Hasanipanah, M., Koopialipoor, M., Le, T.T., Kardanig, N., Armaghanih, D.J., 2021. Soft computing based closed form equations correlating L and L-type Schmidt hammer rebound numbers of rocks. Transportation Geotechnics, 29, 100588.
4. Ayday, C., Goktan, R.M., 1992. Correlations between L and L-type Schmidt hammer reboumd values obtained during field testing. ISRM Symposium: Eurock'92 - Rock Characterization, 14-17 September 1992, Chester, U.K., J.A.Hudson (ed.), British Geotechnical Society, London, 47-50.
5. Aydin, A., Basu, A., 2005. The Schmidt hammer in rock material characterization. Engineering Geology, 81, 1–14.