Boundary layer control for low Reynolds number fan rig testing

Abstract

Ultra-high bypass ratio turbofans offer significant reductions in fuel and pollution due to their higher propulsive efficiency. Short intakes might lead to a stronger fan-intake interaction, which creates uncertainty in stability at off-design conditions. Due to the prohibitive cost of full-scale experimental testing, subscale testing in wind tunnels is used to understand this behaviour. The low Reynolds number of subscale models results in unrepresentative laminar shock-boundary layer interactions. The boundary layer state thus needs to be conditioned to better represent full-scale transonic fans. This paper proposes the use of an inexpensive and robust flow control method for the suction side of a fan blade. Design guidelines are given for the location and height of the discrete roughness elements used to control the boundary layer state. This paper also presents a rapid experimental validation methodology to ensure and de-risk the application of the boundary layer trip to 3D rig blades. The experimental methodology is applied to a generic aerofoil representative of a fan tip section. The experimental method proves that it is possible to reproduce boundary layers and pressure distributions of a full-scale fan blade on a 1/10 subscale model. The results obtained confirm that the boundary layer trip method successfully promotes transition at the location representative of full-scale blades, avoiding unrepresentative laminar shock wave boundary layer interactions. This highlights the importance of conditioning boundary layers in low Reynolds number fan rig testing.