NONLINEAR CALCULATION OF BENT STEEL-REINFORCED CONCRETE ELEMENTS-Reference-Cited by-同舟云学术

NONLINEAR CALCULATION OF BENT STEEL-REINFORCED CONCRETE ELEMENTS

Published:2024-06-28 Issue:2 Volume: Page:9-23
ISSN:2710-4435
Container-title:Herald of Polotsk State University. Series F. Civil engineering. Applied sciences
language:
Short-container-title:Herald of Polotsk State University. Series F. Civil engineering. Applied sciences

Author:

LAZOUSKI D.¹,GLUKHOV D.²,KHATKEVICH A.¹,HIL A.¹,CHAPARANGANDA E.³

Affiliation:

1. Euphrosyne Polotskaya State University of Polotsk

2. LLC «SoftClub»

3. Botswana International University of Science and Technology

Abstract

Steel-reinforced concrete structures at the present stage of development of the construction industry are widely used in industrial buildings with heavy loads on floors, civil high-rise buildings and various engineering structures. The article presents the results of using a nonlinear calculation method to calculate the parameters of the stress-strain state (normal stresses and relative deformations at any stage of work under load, strength and deformability) of bent steel-reinforced concrete elements, provided that rigid steel profiles and reinforced concrete work together. When calculating the parameters of the stress-strain state of steel-reinforced concrete elements, the stages of their work during manufacture (forced shrinkage deformations of monolithic concrete during its hardening) and operation (creep of concrete under prolonged load action) are taken into account. A criterion for calculating the bending moment corresponding to the strength of a steel-reinforced concrete element is proposed, which does not require normalization of the ultimate compressibility of concrete, allowing for a high degree of redistribution of forces in the cross section of a steel-reinforced concrete element with rigid reinforcement. The advantages of the nonlinear calculation method are demonstrated by examples of steel-reinforced concrete floor beams from TKP 45-5.03-16-2005 "Structures of steel-reinforced concrete coatings and floors. Design rules".

Publisher

Polotsk State University

Reference31 articles.

1. Tamrazyan, A.G. & Loleit, A.F. (2018). Istoriya razvitiya teorii zhelezobetona: biograficheskii ocherk. Moscow: MGSU. (In Russ.).

2. Babalich, V.S. & Androsov, E.N. (2017). Stalezhelezobetonnye konstruktsii i perspektiva ikh primeneniya v stroitel'noi praktike Rossii [Steel-reinforced concrete structures and the prospects for their application in Russian construction practice]. Uspekhi sovremennoi nauki [Advances in modern science], 4(4), 205–208. (In Russ., abstr. in Engl.).

3. Kibireva, Yu.A. & Astaf'eva, N.S. (2018). Primenenie konstruktsii iz stalezhelezobetona [The use of steel-concrete structures]. Ekologiya i stroitel'stvo [Ekologiya i stroitelstvo], (2), 27–34. DOI: 10.24411/2413-8452-2018-10004. (In Russ., abstr. in Engl.).

4. Vinogradova, N.A. & Shvets, G.A. (2020). Issledovaniya stalezhelezobetonnykh izgibaemykh konstruktsii (obzor) [Research of steel-reinforced concrete bendable structures (review)]. Vestn. inzhener. shkoly DVFU [Bulletin of the FEFU engineering school], 1(42), 115–127. (In Russ., abstr. in Engl.).

5. Desyatkin, M.A., Konin, D.V., Martirosyan, A.S. & Travush, V.I. (2015). Raschet stalezhelezobetonnoi kolonny vysotnogo doma na kosoe vnetsentrennoe szhatie [Calculation of a steel-reinforced concrete column of a high-rise building for oblique eccentric compression]. Zhilishchnoe str-vo [Housing construction], (5), 92–95. (In Russ., abstr. in Engl.).