Abstract
Microbiologically Induced Calcium Carbonate Precipitation (MICP) is a technology for improving soil characteristics, especially strength, that has been gaining increasing interest in literature during the last few years. Although a lot of influencing factors on the result of MICP are known, particle size and shape of the particles remain poorly understood. While destructive measuring of compressive strength or calcium carbonate content are important for the characterization of samples these methods give no insight into the internal structures and pore networks of the samples. X-ray microcomputed tomography (micro-CT) is a technique that is used to characterize the internals of rocks and to a certain degree MICP-treated soils. However, the impact of filtering and image processing of micro-CT Data depending on the type of MICP sample is poorly described in the literature. In this study, single fractions of local quarry were treated with MICP through the ureolytic microorganism Sporosarcina pasteurii to investigate the influence of particle size distribution on calcium carbonate content, unconfined compressive strength and the reduction of water permeability. Additionally, micro-CT was conducted to obtain insights into the resulting pore system. The impact of the Gauss filter und Non-local means filter on the resulting images and data on the pore network are discussed. The results show that particle size has a significant impact on the result of all tested parameters of biosandstone with lower particle size leading to higher strength and generally higher calcium carbonate content. Micro-CT data showed that the technology is feasible to gain valuable insights into the internal structures of biosandstone but the resolution and signal-to-noise ratio remain challenging, especially for samples with particle sizes smaller than 125 µm..