Upgrading the performance of InP/Si based multi junction thin solar cell through Opto-electronics modeling and simulation-Reference-Cited by-同舟云学术

Upgrading the performance of InP/Si based multi junction thin solar cell through Opto-electronics modeling and simulation

Published:2023-07-10 Issue: Volume: Page:
ISSN:
Container-title:
language:
Short-container-title:

Author:

ROY ARIJIT BARDHAN¹,AKBAR SHAIK²

Affiliation:

1. SRM Institute of Science& Technology

2. Madanapalle Institute of Technology & Science

Abstract

Abstract Indium Phosphide (InP) and Silicon(Si) based multi junction thin solar cell is one of the most competent devices in PV community which have the potential to fulfill the energy demand of present era with minimum material consumption. Through this study we try to develop different types of designs and evaluate the efficiency of InP/Si based multi-junction solar cells through various opto-electronics simulation studies. During this investigation we achieved more than 18% efficiency of solar cell using optimized doping profile of both materials with 12 µm substrate thickness. Further the electrical model was validated by different optical studies and found its competency in that domain also.

Publisher

Research Square Platform LLC

Reference14 articles.

1. Tabulated Values of the Shockley-Queisser Limit for Single Junction Solar Cells;Sven R;Sol. Energy,2016

2. Green, M., A, “Third Generation Photovoltaics: : Adv. Solar Energy Conversion” Springer, 65, (2003)

3. Nanomirror-embedded back reflector layer (BRL) for advanced light management in thin silicon solar cells;Banerjee S;Ind. Eng. Chem. Res.,2019

4. Light management studies by using different surface texturing for thin c-Si solar cells;Roy AB;Appl. Phys. A,2021

5. B.Benyoucef ” simulation of the solar cells with pc1d, application to cells based on silicon”;Belarbi M;Adv. Energy,2014