Improved mechanical properties of dense β-Si3N4 ceramics fabricated by spark plasma sintering with Al2O3-YSZ additives

Abstract

In this work the influence of sintering conditions on structure and mechanical properties of Si3N4 ceramics was investigated. Nearly full dense ?-Si3N4 ceramics with excellent mechanical properties and interlock microstructure of elongated grains was fabricated using Al2O3 and yttria-stabilized zirconia (YSZ with 3mol% Y2O3) as sintering additives by spark plasma sintering (SPS) at relatively low temperature of 1600?C for 15min. X-ray diffraction analysis shows that the SPSed sample is pure ?-Si3N4 phase without any secondary crystalline phase. The elements Al, Zr, Y and O of the additive can diffuse into Si3N4 lattice forming ?-Si3N4- based solid solution. The residual additive formed an amorphous phase at the ?-Si3N4 grain boundaries. The ?-Si3N4 ceramics obtained by SPS using 6.0wt.% Al2O3 and 6.0 wt.% YSZ as additives shows interlock elongated ?-Si3N4 grains of 500 nm in width and 3000 nm in length, high density of 3.29 g/cm3, Vickers hardness of 16.15GPa and high fracture toughness KIC of 6.75MPam1/2.