Numerical simulation and experimental research of multi-pipe jet fireball-Reference-Cited by-同舟云学术

Numerical simulation and experimental research of multi-pipe jet fireball

Published:2022 Issue:5 Part B Volume:26 Page:4423-4435
ISSN:0354-9836
Container-title:Thermal Science
language:en
Short-container-title:THERM SCI

Author:

Tai Bin¹,Hao Xiaojian¹

Affiliation:

1. Science and Technology on Electronic Test and Measurement Laboratory, North University of China, Taiyuan Shanxi Province, China + School of Instrument and Electronics, North University of China, Taiyuan, China

Abstract

This paper studies a self-designed high temperature fireball quasi-static simulation device to understand the temperature distribution of each substance inside the fireball under the multi-pipe injection technology. The changes in the physical field of the high temperature fireball are obtained through numerical simulation. The simulation model in this paper adopts the turbulent k-? model, and simulates the material transfer process according to Fick's law. The commercial software COMSOL multiphysics is used to give and analyze the local characteristics of fluid-flow and heat transfer. The simulation device formed a high temperature fireball under the interaction of the three-way jet fire. The experimental data verified the accuracy of the simulation results, and the experimental results were in good agreement with the simulation results. This method of analyzing the actual temperature field through simulation can be used to provide a powerful verification scheme for the detection of complex multi-temperature fields in the future.

Publisher

National Library of Serbia

Subject

Renewable Energy, Sustainability and the Environment

Reference26 articles.

1. Jr, Feier, A Numerical Study of Three-Dimensional Flame Propagation over Thin Solids in Purely Forced Concurrent Flow Including Gas-Phase Radiation, Ph. D. thesis, Case Western Reserve University, Cleveland, O., USA, 2007

2. Cloete, S., et al., An Assessment of the Ability of Computational Fluid Dynamic Models to Predict Reactive Gas-Solid Flows in a Fluidized Bed, Powder Technology, 215 (2012), Jan., pp.15-25

3. Wenqi, Z., et al., DEM Simulation of Gas-Solid Flow Behaviors in Spout-Fluid Bed, Chemical Engineering Science, 61 (2006), 5, pp. 1571-1584

4. Wei, D., et al., Computational Fluid Dynamics (CFD) Modeling of Spouted Bed: Assessment of Drag Coefficient Correlations, Chemical Engineering Science, 61 (2006), 5, pp. 1401-1420

5. Kamnis, S., et al., Mathematical Modelling of Inconel 718 Particles in HVOF Thermal Spraying, Surface and Coatings Technology, 202 (2008), 12, pp. 2715-2724