Techno Press
You logged in as Techno Press

Membrane Water Treatment
  Volume 8, Number 6, November 2017 , pages 591-612
DOI: https://doi.org/10.12989/mwt.2017.8.6.591
 

Fabrication and characterization of polysulfone ultrafiltration membrane using polyethylene glycol and tartaric acid: morphology and performance in protein separation
N. Sharma and M.K. Purkait

 
Abstract
    Increase in the hydrophilicity (HPCT) of polysulfone (PS) membrane and subsequently decrease in fouling can be achieved by surface modification of PS based membranes. Therefore, in this work, ultrafiltration membranes with increased HPCT were prepared using the enantiomeric tartaric acid (D-TA) and racemic tartaric acid (DL-TA). Phase inversion technique was used for the preparation of polyethylene glycol and TA blended PS membrane. Morphological analysis of the fabricated membranes was done by scanning electron microscope and atomic force microscopy. Bovine serum albumin (BSA) solution was taken for finding the permeation and rejection behavior of prepared membranes. Maximum BSA rejection was increased by 70.5% for the modified membrane.
 
Key Words
    polysulfone; tartaric acid; hydrophilicity; chirality; polyethylene glycol
 
Address
N. Sharma and M.K. Purkait : Department of Chemical Engineering, Indian Institute of Technology Guwahati,
Guwahati - 781039, Assam, India
 

Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2025 Techno Press
P.O. Box 33, Yuseong, Daejeon 305-600 Korea, Tel: +82-42-828-7996, Fax : +82-42-828-7997, Email: admin@techno-press.com