Investigation of the Friction Coefficients and Surface Roughness Properties of Denim Fabrics after Abrasion-Reference-Cited by-同舟云学术

Investigation of the Friction Coefficients and Surface Roughness Properties of Denim Fabrics after Abrasion

Published:2022-09-20 Issue: Volume: Page:
ISSN:1300-3356
Container-title:TEKSTİL VE KONFEKSİYON
language:en
Short-container-title:

Author:

AKGÜN Mine¹,KARA Gizem²

Affiliation:

1. BURSA ULUDAG UNIVERSITY

2. Almaxtex Tekstil Sanayi ve Ticaret A.Ş.

Abstract

The abrasion behavior of denim fabrics could be affected by fabric surface properties (surface friction coefficient and roughness) depending on fabric structural parameters. This study investigated the friction coefficients and surface roughness properties of denim fabrics woven with different structural parameters after abrasion. In general, while the abrasion process reduced the fabric friction coefficients during the initial abrasion cycles, the surface's friction coefficient increased as the number of abrasion cycles increased. However, due to the increased abrasion cycles, there was a steady decline in the roughness values of the fabric surfaces. Denim fabrics were woven with a 3/1 twill weave pattern. When the effect of the fabric structural parameters on fabric friction coefficient and roughness values were evaluated, the yarn count (Nm), yarn density, and fabric cover factor showed negative correlation coefficients. In contrast, the thickness, unit weight, and bulk density of fabric showed positive correlation coefficients.

Publisher

Tekstil Ve Konfeksiyon

Subject

Industrial and Manufacturing Engineering,General Materials Science

Reference41 articles.

1. 1. Korkmaz İ.B. 2009. Denim Kumaş İmalatı ve Üzerine Uygulanan İşlemler (Master’s thesis). Haliç Üniversitesi, Sosyal Bölümler Enstitüsü, Tekstil ve Moda Tasarımı Anasanat Dalı, Tekstil ve Moda Tasarımı Programı, İstanbul, p. 108.

2. 2. Çakır N. 2010. Kot Pantolon Üretiminde Bitim İşlemlerinin ve Farklı Denim Kumaşların Fit Üzerine Etkileri (Master’s thesis). Pamukkale Üniversitesi, Fen Bilimleri Enstitüsü, Tekstil Mühendisliği Anabilim Dalı, Denizli, p. 99.

3. 3. Tarhan M. 2005. Eskitme Yöntemlerinin Denim Mamullerin Performans Özelliklerine Etkisi (Master’s thesis). Dokuz Eylül Üniversitesi, Fen Bilimleri Enstitüsü, Tekstil Mühendisliği Ana Bilim Dalı, İzmir, p. 120.

4. 4. Toksöz M., Mezarcıöz S. 2013. Application of Special Washing Processes to Denim Fabrics. Çukurova University Journal of the Faculty of Engineering and Architecture, 28, 141-147.

5. 5. Vassiliadis S.G., Provatidis C.G. 2004. Structural characterization of textile fabrics using surface roughness data. International Journal of Clothing Science and Technology, 16, 445-457.