Additive manufacturing of Ku/K‐band waveguide filters: a comparative analysis among selective‐laser melting and stereo‐lithography-Reference-Cited by-同舟云学术

Additive manufacturing of Ku/K‐band waveguide filters: a comparative analysis among selective‐laser melting and stereo‐lithography

Published:2017-09-29 Issue:14 Volume:11 Page:1936-1942
ISSN:1751-8733
Container-title:IET Microwaves, Antennas & Propagation
language:en
Short-container-title:IET Microwaves, Antennas & Propagation

Author:

Peverini Oscar A.¹,Addamo Giuseppe¹,Lumia Mauro¹,Virone Giuseppe¹,Calignano Flaviana²,Lorusso Massimo²,Manfredi Diego²

Affiliation:

1. Istituto di Elettronica e di Ingegneria dell'Informazione e delle Telecomunicazioni (IEIIT), National Research Council of Italy (CNR)c/o Politecnico di Torino, Corso Duca degli Abruzzi 2410129TorinoItaly

2. Center for Sustainable Future Technologies (CSFT@PoliTo)Istituto Italiano di Tecnologia (IIT)Corso Trento 2110129TorinoItaly

Publisher

Institution of Engineering and Technology (IET)

Subject

Electrical and Electronic Engineering

Link

https://onlinelibrary.wiley.com/doi/pdf/10.1049/iet-map.2017.0151

Reference24 articles.

1. Antennas for multiple spot beam satellites;Schneider M.;CEAS Space J.

2. Booth P. Gilmore J. Lluch E.V. et al.: ‘Enhancements to satellite feed chain performance testing and lead‐times using additive manufacturing’.Proc. tenth European Conf. on Antennas and Propagation (EuCAP) Davos Switzerland 2016

3. A Metallic 3-D Printed E-Band Radio Front End

4. Enhanced Topology of $E$-Plane Resonators for High-Power Satellite Applications

5. Lluch E.V. Booth P.: ‘Enhancing waveguide filter performance using additive manufacturing’.Workshop on Additive Manufacturing for Space Application ESTEC ‐ Noordwijk The Netherlands October2014

Cited by 39 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Design and Implementation of Quart-Torus Waveguide Filters for Layout Optimization Using Additive Manufacturing Techniques;IEEE Transactions on Microwave Theory and Techniques;2024

2. Compact Additively Manufactured Conformal Slotted Waveguide Antenna Array;IEEE Antennas and Wireless Propagation Letters;2023-08

3. Compact Wideband Groove Gap Waveguide Bandpass Filters Manufactured with 3D Printing and CNC Milling Techniques;Sensors;2023-07-07

4. Synthesis of Rectangular Waveguide Filters With Smooth Profile Oriented to Direct Metal Additive Manufacturing;IEEE Transactions on Microwave Theory and Techniques;2023-07

5. How 3D-Printing Is Changing RF Front-End Design for Space Applications;IEEE Journal of Microwaves;2023-04