Effect of incident laser wavelength on structural and morphological properties of Bi1.6Pb0.4Sr2Ca2Cu3Oy films grown by pulsed laser deposition-Reference-Cited by-同舟云学术

Effect of incident laser wavelength on structural and morphological properties of Bi1.6Pb0.4Sr2Ca2Cu3Oy films grown by pulsed laser deposition

Published:2023-06-07 Issue:3 Volume:35 Page:
ISSN:1042-346X
Container-title:Journal of Laser Applications
language:en
Short-container-title:

Author:

Romero-Sanchez M.¹^ORCID,Juarez-Lopez J. M.²^ORCID,Nieto-Zepeda K.¹^ORCID,Quiñones-Galvan J. G.³^ORCID,Santos-Cruz J.¹^ORCID,de la L. Olvera M.⁴^ORCID,Contreras-Puente G.⁵^ORCID,de Moure-Flores F.¹^ORCID

Affiliation:

1. Facultad de Química, Materiales-Energía, Universidad Autónoma de Querétaro 1 , 76010 Querétaro, México

2. Escuela Nacional de Estudios Superiores, Unidad Juriquilla, UNAM 2 , 76230 Querétaro, México

3. Departamento de Física, Centro Universitario de Ciencias Exactas e Ingenierías, Universidad de Guadalajara 3 , 44430 Jalisco, México

4. Departamento de Ingeniería Eléctrica, Sección de Estado Sólido, CINVESTAV-IPN 4 , Apdo. Postal 14-740, México CDMX 07360, México

5. Escuela Superior de Física y Matemáticas del IPN 5 , CDMX 07738, México

Abstract

A Bi1.6Pb0.4Sr2Ca2Cu3Oy superconductor target was obtained by a solid-state reaction at 860 °C by 130 h. Afterward, Bi1.6Pb0.4Sr2Ca2Cu3Oy thin films were grown by pulsed laser deposition at room temperature, from pellets of the synthesized target, on (111) silicon substrates. Bi1.6Pb0.4Sr2Ca2Cu3Oy films were deposited using an Nd:YAG laser with two different incident wavelengths (532 and 1064 nm) and by varying the distance between the target and the substrate: 20, 25, and 30 mm. X-ray diffraction results showed that Bi1.6Pb0.4Sr2Ca2Cu3Oy films were obtained with Bi-2223 and Bi-2212 superconductor phases.

Funder

Consejo Nacional de Ciencia y Tecnología

Universidad Autónoma de Querétaro

Publisher

Laser Institute of America

Subject

Instrumentation,Biomedical Engineering,Atomic and Molecular Physics, and Optics,Electronic, Optical and Magnetic Materials

Link

https://pubs.aip.org/lia/jla/article-pdf/doi/10.2351/7.0001024/17977793/032003_1_7.0001024.pdf

Reference34 articles.

1. Characterization of high-temperature superconductor bulks for electrical machine application;Materials,2021

2. Microstructure and fluctuation-induced conductivity analysis of Bi2Sr2CaCu2O8+δ (Bi-2212) nanowire fabrics;Crystals,2020

3. Impact of annular yoke geometry on performance of a dynamo-type HTS flux pump;IEEE Trans. Appl. Supercond.,2018

4. Design comparisons of concentric three-phase HTS cables;IEEE Trans. Appl. Supercond.,2019

5. Superconducting electrode capacitor based on double-sided YBCO thin film for wireless power transfer applications;Supercond. Sci. Technol.,2019