Affiliation:
1. Vladimir State University
Abstract
Consolidation of nanocomposite AlMg2/graphite powders, produced by mechanical synthesis in a planetary ball mill, was carried out. Using the methods of Raman spectroscopy, and X-ray diffraction analysis, the structural-phase composition of the obtained bulk materials was studied. It was found that the samples have nanocomposite structure consisting of nanocrystalline aluminum and nanosized graphite particles. An increase in the consolidation temperature up to 450 °C leads to the formation of a dispersed phase of aluminum carbide. The effect of graphite percentage and consolidation conditions on the microhardness was estimated. Mechanisms of bulk material hardening are determined. Tribological tests of the obtained nanocomposite materials under conditions of contact interaction with 4Kh5MFS steel at a load of 1–10 N were carried out. Data on the change in the friction coefficient and magnitude of mass wear depending on the consolidation conditions and the graphite content were obtained.
Publisher
Aleksandras Stulginskis University
Reference11 articles.
1. Research of the Mechanism and Development of the Wear Model of a Diamond Tool When Turning Aluminum-Matrix Composite Materials;A.I. Zalesnov;Journal of Friction and Wear,2017
2. Wear and mechanical properties of 6061-T6 aluminum alloy surface hybrid composites [(SiC + Gr) and (SiC + Al2O3)] fabricated by friction stir processing;D. Aruri;Technol.,2013
3. Study of the preparation of Al2O3sf.SiCp/Al composites and their wear resisting properties;Z.M. Du;Technol.,2004
4. Creep behavior and wear resistance of Al 5083 based hybrid composites reinforced with carbon nanotubes (CNTs) and boron carbide (B4C);A. Alizadeh;Journal of Alloys and Compounds,2015
5. D. Poiriera, R. Gauvin, R.A.L. Drew, Structural characterization of a mechanically milled carbon nanotube/aluminum mixture, Composites: Part A, 40, 2009, p. 1482–1489.