Study of Mechanical and Tribological Behavior of Fly ash with E-Glass fibre Reinforced AL MMC’s-Reference-Cited by-同舟云学术

Study of Mechanical and Tribological Behavior of Fly ash with E-Glass fibre Reinforced AL MMC’s

Published:2024-04-30 Issue: Volume: Page:369-380
ISSN:2581-9429
Container-title:International Journal of Advanced Research in Science, Communication and Technology
language:en
Short-container-title:IJARSCT

Author:

Dipak Ramdas Hire ¹

Affiliation:

1. Amrutvahini Polytechnic, Sangamner, Ahmednagar, Maharashtra, India

Abstract

AMC’s specimen made by liquid stir casting technique, by addition of fixed 3% E-glass fibers and fly ash particles in different proportions (4, 6 and 8 wt.%) prepared the matrix phase. A uniform distribution of reinforcement is obtained with good bonding with matrix. Dry sliding wear behavior of the aluminum alloy and the composites has been studied and tested using a pin-on-disc wear and friction monitor. The testing carried out on sliding velocity of 1.5, 2.5 and 3.5 m/s and load ranges from 1, 2 and 3kgf. The composite shows better mechanical properties than the base alloy. Abrasive wear resistance improves by addition of fly ash reinforcement

Publisher

Naksh Solutions

Reference14 articles.

1. [1] Introduction to Composites and History of Composites, 2001. Composites, Volume 21of ASM Handbook,

2. [2] Aluminum Alloy Castings-Properties, Processes, and Applications, 2004 ASM International, J. Gilbert Kaufman, Elwin L. Rooy

3. [3] ROHATGI P.K, Applications of Fly Ash in SynthesizingLow-Cost MMCs for Automotive andOther Applications, 2006

4. [4] P. Shanmughsundram, R. Subramanium, G Prabhu , "Some Studies on Aluminium – Fly Ash Composites Fabricated by Two Step Stir Casting Method", European Journal of Scientific Research ISSN 1450-216X Vol.63 No.2 (2011), pp.204-218

5. [5] Deepak singla, “Evaluation Of Mechanical Properties Of Al 7075-Fly Ash Composite Material”, 2013, ISSN: 2319-8753.