Assessment of process parameters on modified 316L SS surfaces prepared via hybrid powders mixed EDM

Abstract

Abstract This study aims to assess the influence of hybrid powders (hydroxyapatite, manganese, copper, and carbon nanotube) mixed electric discharge machining (EDM) and coating process on 316L stainless steel (SS). An efficiently machined, hydrophilic, thin, and microporous surface is produced using variable discharge energies and powders weighted percentage suspended in the dielectric medium. The research outcome indicates that the hybrid powders mixed-EDM process synthesised a coating that substitutes the base elements with foreign elements of calcium (Ca), phosphorous (P), copper (Cu), carbon (C), oxygen (O), and manganese (Mn). The surface wettability response of the coating displays a hydrophilic nature with a contact angle of 51.5° and surface energy of 52.9 mJ m−2. The coated surface exhibited a roughness value of 3.201 μm, which is expected to promote osseointegration, and the material removal rate has been enhanced to an optimal value of 100.32 mg/min. The Taguchi design demonstrated that the powder mixing ratio, current intensity, and spark time are the most influential factors in the hybrid powders mixed EDM process. This study determines a novel multiple additives-assisted EDM method to synthesise a coating on 316L SS with potential benefits for biomedical applications.