Author:
Arunthathi J M,Prabhakar R
Abstract
Abstract
This paper, have a tendency to develop a reconfigurable analog front end for wireless body sensing element nodes and implantable devices with reduced size. By converting voltage in to current the effort to achieve the area efficiency is taken. Because these are bio implantable chips if the numbers of transistors are reduced it will reduce lots of power and area, the circuit operation is also quick. In the proposed system, narrow swing current mirror circuit is used in the low pass filter region. By using the current mirror the same input current can be obtained at the output. At the same time the area of the chip used in the devices gets reduced. The active space of the chip is 157µm2.
Reference15 articles.
1. A 24 μW, battery less, crystal-free, multinode synchronized SoC ‘bionode’ for wireless prosthesis control IEEE;Bhamra;J. Solid-State Circuits,2015
2. An ultralow-power RF energy-harvesting transceiver for multiple-node sensor application;Kim;IEEE Trans. Circuits Syst. II,2015
3. An injectable 64 nW ECG mixed-signal SoC in 65 nm for arrhythmia monitoring;Chen;IEEE J. Solid-State Circuits,2015
4. An ECG-on-chip with 535 nW/channel integrated lossless data compressor for wireless sensors;Deepu;IEEE J. Solid-State Circuits,2014
5. 0.56 V, –20 dBm RF-powered, multi-node wireless body area network system-on-a-chip with harvesting-efficiency tracking loop;Xia;IEEE J. Solid-State Circuits,2014