Influence humidity and heat on tensile shear strength of lap joints made of solid fir/spruce wood

Abstract

Abstract Determination of tensile shear strength of lap joints is carried out according to three standards: BAS EN 205:2018 for adhesives used for non–load–bearing structures, and according to BAS EN 302-1:2014 for adhesives used for the manufacture of load-bearing structures and according to EN 14257:2019 for lap joints who are exposed to elevated temperatures. The paper presents the results of tensile shear strength of lap joints made of solid fir/spruce (Abies alba ssp./Picea abies spp). Tensile shear strength was tested in 4 groups of tests samples. The Group 1 consisted the samples were 7 days in standard atmosphere [20/65]. The Group 2 consisted the samples were previously soaked in water at (20 ± 5) °C, then recondition in standard atmosphere [20/65]. The Group 3 consisted the samples were previously 6 h soaked in boiling water 2 h, then soaked in water at (20 ± 5) °C; the samples tested in the wet state. The Group 4 consisted the samples were previously exposed to heat in a preheated fan oven, at (80 ± 2) °C, for (60 ± 2) min. The test results can be applied for gluing windows, doors, stairs, high-frequency gluing, veneering panels, etc.