ZTA Ceramic Materials for DLP 3D Printing

Abstract

Abstract As a new additive manufacturing method, DLP has the advantages of high precision, fast speed and low cost. ZTA ceramic is anticipated to be used in more applications due to its superior bending strength, fracture toughness and thermal conductivity. But the detailed study with ZTA printing material for DLP is still rarely reported. In this experiment, ZTA ceramic UV resin with various ZrO2 concentration (5-15wt.%) were investigated and tested for their 3D printing performance. ZTA ceramic UV resin with low viscosity (<3Pa·s at shear rate of 10s−1) and high solid load (55vol.%) were successfully developed. After sintering at a temperature of ⩾ 1600°C, a relative density of >96% can be always promised. For the optimized doping level of ZrO2 at 11wt%, a density of 99% can be achieved.