Author:
Matyakubov B,Mamajonov M,Shakirov B,Teplova G,Shakirov B
Abstract
Abstract
The article discusses the use of the design of the forebays of a polygonal cross-section to improve the hydraulic characteristics of the water intake structures of pumping stations, in which the longitudinal slope in the direction of the middle chamber is i = 0.1, the adjacent longitudinal slope is 0.15 and with the extreme chambers the longitudinal the slope is 0.2. The faces of each chamber with a forebay have a transverse slope equal to i
c
= 0.1 and the angle of taper of the forebays in the plan is α = 35°. In the joint operation of 5 pumps, for the forebays of a polygonal cross-section, the total resistance coefficient is ∑ξ
total ext.
= 0.568 and for a typical ∑ξ
total ext.
= 0.72. With the simultaneous operation of 5 pumps, the average supply of 3 pumps is 0.0051 m3/s, 2, and 4 pumps, respectively 0.00498 … 0.00504 m
3
/s, for 1 and 5 pumps, 0.00478, and 0.00481 m
3
/s, respectively at the extreme pumps, the flow rate increases by 4.9…6.3% relative to the standard forebays.
Reference23 articles.
1. Interconnection of influent channel and pumping station units;Glovatskiy,2019
2. Change of water supply of pumps;Mamajonov;Agric. Uzb,2005
3. Providing of the law of pumping station parameters’ regulation by means of throttling elements;Nenja,2012
4. Factors affecting the operational and energy mode of operation of pumping stations;Ikramov,2013
5. A comprehensive review on energy efficiency enhancement initiatives in centrifugal pumping system;Shankar,2016
Cited by
10 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献