Axial formation and cross-section distortion control for stretch bending based on batch simulations

Abstract

Abstract Stretch bending is a widely used to form long parts with a definite cross-section shape. The forming path is an effective way to eliminate the defects such as springback, distortion when the material and the die shape are determined. In this study, the stretch bending path is represented by a curve function of bending angle and stretch length. To simplify the path optimization problem, the path is represented by 4 parameters, including a newly introduced parameter of total stretch. Based on the batch simulation results, it is found that the axial springback and cross section distortion are primarily controlled by total stretch, bending angle and pre-stretch proportion. When the total stretch is determined, the different distribution schemes for pre-stretch, bending stretch and post-stretch in total stretch have a similar effect on forming quality except the schemes with extremely large proportions of pre-stretch. In most cases, with the total stretch length in growth, the axial springback decreases dramatically at first and then stays constant while the section distortion continues to rise, indicating that the optimal forming path is around the elbow point in the relationship curve of total stretch and springback angle. The optimal path is verified by experiments. It is shown that for a workpiece with determined material and die shape, the optimal path to minimize axial rebound and section distortion simultaneously does exit and the study provide an effective way to obtain it.