Reduction of freight car wheel wear of 1520 mm gauge railways

Abstract

Abstract A brief description is given of the comprehensive modernization of standard freight car trucks through the use of devices of American companies adapted for railways with a 1520 mm gauge and wheels with ITM-73 specially developed wear-resistant profile, which allows several times to increase the resource of problematic running gears. An approximate method is proposed for solving the wheel–rail interaction problem with determining the position and size of non-elliptic contact patches, including with conformal contact. Using this method, new profiles have been developed for turning worn wheels (ITM-73-01), as well as new wheels for cars with an axial load on rails of 23.5 tf (ITM-73-02) and 25 tf (ITM-73-03). The data of experimental studies showed that the average wear rate of the wheel flanges of freight cars with complex modernized trucks equipped with wheels with ITM-73-01 profile is 3.5-5 times lower than that of a standard car with a standard wheel profile. According to forecast estimates, the use of wheels with profiles ITM-73-02, ITM-73-03 will allow to achieve even greater increase in the resource indicators of wheelsets for wear of the flanges.