Evolution of hydrogen isotopes retention behavior of in-situ boronization films in EAST

Abstract

Abstract Effective management of hydrogen isotopes retention in plasma-facing materials (PFMs) is crucial, particularly when utilizing tritium (T) as fuel, for the success of burning plasma operations. Boronization, a widely employed technique for controlling fuel recycling and mitigating impurity influx from plasma-surface interactions into the core of burning plasma, significantly influences hydrogen isotopes retention in PFMs. In this study, boronization films were generated by ion cyclotron range of frequency (ICRF) discharge assisted boronization with C2B10H12 as boron source on tungsten substrates at Experimental Advanced Superconducting Tokamak (EAST) which employing ITER-like water-cooled W monoblock PFMs and components (PFCs), followed by in-situ glow discharge (GD) cleaning for 2 h and 20 shots (180 s) edge-plasma exposure. Employing the Material and Plasma Evaluation System (MAPES), representative samples were analyzed after each process. The resultant carbon–boron films, dense and continuous, exhibited thickness up to 120 nm and were identified as amorphous in structure. It was observed that the D2-GD cleaning resulted in a significant isotopic exchange effect, effectively reducing the hydrogen (H) retention in the carbon–boron films. This hydrogen isotope replacement efficiency was found to be influenced by the thickness of the films. Notably, after boundary plasma exposure, samples with thicker films demonstrated an enhanced capacity to capture deuterium (D), adsorbing 10 times more D than bare tungsten (W). Our findings offer transformative insights for T recycling analysis and the plasma operation of devices like International Thermonuclear Experimental Reactor (ITER), highlighting the impact of boronization and subsequent treatments on hydrogen isotope retention behavior in PFMs.