Preparation and Performance of a New Type of Large-head Cutting Pick with Bimetallic Composite
-
Published:2023-03-01
Issue:1
Volume:2459
Page:012021
-
ISSN:1742-6588
-
Container-title:Journal of Physics: Conference Series
-
language:
-
Short-container-title:J. Phys.: Conf. Ser.
Author:
Liu Shuang,Zhao Yingfan,Gao Jing,Yan Zelin,Li Tieshuai,Tong Weiping
Abstract
Abstract
In this paper, a new type of pick with a large size head is produced by a low-temperature bimetallic composite. The pick head is composed of 60 mm long high chromium cast iron, and the pick handle is 20# steel. They are connected by nickel-based alloy powder. The size of the bonding interface observed by SEM is approximately 1.3 mm. The pick head is mainly composed of M7C3 and M2C compounds with high wear resistance to bear the wear resistance of the pick. The pick handle with outstanding toughness bears the impact of picks. It is also worth mentioning that the impact toughness of the sample reaches 62 J/cm2 and the shear strength is 208 MPa.The hardness of the handle is about 325HV, and the pick head hardness is about 935HV. The hardness gradually increases from the pick handle to the pick head.
Subject
Computer Science Applications,History,Education
Reference7 articles.
1. Wear strength and fracture of WC-Co cemented carbides used for the cutter in coaling mining machine;Tan;Rare Metal Materials and Engineering,1996
2. Microstructure and properties of low-carbon air-cooling bainite steels with high Si used for pickers;Jiang;Journal of Tsinghua University,2001
3. Comparative analysis of damage forms of inlaid casting picks and forging brazing picks [J];Zhang;Journal of Jiamusi University (Natural Science Edition),2000
4. Microstructure and properties of Fe-based coatings on cutting pick surface formed by plasma jet surface metallurgy [J];Chen,2009
5. Preparation and properties of a new cutting pick of coal shearers;Luo;Mining Science and Technology (China),2010