Physical and Numerical Simulation of Wave Transmission Over Submerged Breakwater

Abstract

Abstract Nowadays, the submerged breakwaters are becoming attractive to the coastal engineer because they have many advantages including keeping aesthetic value of coastal scenery and reasonable for wave energy reduction. However, on the other hand, their design is very complicated. So, it is very important to understand the characteristics and the impact of wave because of the submerged breakwaters. For this purpose, we developed both numerical and physical model for simulation of wave over submerged breakwaters. The numerical model was developed using CADMAS-SURF, which is widely used in a practice of business in Japan. Physical model studies were performed at the Coastal Engineering Research Laboratory, University of Miyazaki, Japan to assess the performance of submerged breakwaters under a wide range of design conditions. The tests include the use of single and double submerged breakwater, as well as the impact of interval between the breakwaters which will be useful references for submerged breakwater designing in the future. The results show that the transmission coefficients of the numerical simulation have a good agreement with the experiment result with the RMS error 0.14 and 0.19 for the single and double breakwater respectively. This study found that, the application of double breakwaters has no significant impact for reducing wave energy compared to the single breakwater for the wave steepness higher than 0.007 and 0.012 based on laboratory and numerical simulation respectively. The best relative breakwater spacings are 0.75, 0.4, 0.45 and 0.35 for any kind of wave with the period of 0.6, 0.8, 1.0 and 1.2 respectively. In those conditions, the transmission coefficients are on minimum value for each kind of wave, that means the double breakwaters have the good performance on energy reduction.