Mixed mode fracture in perfect plastic materials for plane stress conditions

Abstract

Abstract In the study the asymptotic stress fields in the neighbourhood of the crack tip in perfectly plastic Mises materials under mixed mode loading for the full range of the mode mixities are presented. This objective is engendered by the necessity of considering all the values of the mixity parameter for the full range of the mode mixities for plane stress conditions to grasp stress tensor components behaviour in the vicinity of the crack tip as the mixity parameter is changing from 0 to 1. To gain a better understanding of the stress distributions all values of the mixity parameter to within 0.1 were considered and analyzed. The asymptotic solution to the statically determinate problem is obtained by the eigenfunction expansion method. Steady - state stress distributions for the full range of the mode mixities are found. The type of the mixed mode loading is controlled by the mixity parameter changing from zero for pure mode II loading to 1 for pure mode I loading. It is shown that the analytical solution is described by different relations in different sectors, the value of which is changing from 7 sectors to 5 sectors. At loadings close to pure mode II, seven sectors determine the asymptotic solution for the mixity parameter less than 0.39 and five sectors determine the solution for other values of the mixity parameter for plane stress conditions. The number of sectors depends on the mixity parameter. The angular stress distributions are not fully continuous and radial stresses are discontinuous for some values of the mixity parameter.