Abstract
Abstract
Gravity gradiometer sensor performance, platform instability and electronic circuit noise can cause serious influence on the weak gravity gradiometry signal, and the noise level is usually one or several times of gravity gradient signal. This paper put forward a method to resolve this problem according to the characteristics of the signal. First of all, filtrate the gravity gradient signal with a band-passing filter. Then, demodulate the output signal of the band-passing filter, at last, remove the gravity gradiometry noise with the empirical mode decomposition (EMD) method. Then the gravity gradiometer signal was tested on the hardware-in-the-loop simulation platform. The experiment results verify that the various harmonic noise can be removed with the method proposed above, and the gravity gradient signal accuracy and gravity gradient space resolution is further improved, the good properties of the method is of high practice and maneuverability.
Subject
General Physics and Astronomy
Reference13 articles.
1. Status and prospects of gravity gradiometers;Cai;Journal of Chinese Inertial Technology,1999
2. Performance of airborne gravity gradiometers;Dransfield;The Leading Edge,2013
3. Improved resolution of fixed-wing airborne gravity gradiometer surveys;Galder,2014
4. HeliFALCON® Airborne Gravity Gradiometer Data Acquisition in Rugged Terrain;Yamanaka,2013
5. The Key Technologies Development and Analysis of Rotating Accelerometer Grabity Gradiometer;Zhang;Geomatics Science and Technology,2021