Author:
Zhai Zhixuan,Hua Yue,Xue Yuchen,Yang Songhan,Zhang Lei,Li Bo,Lin Yuan,Su Yang,Hao Wenfeng,Hu Yang,Wang Qinghao
Abstract
Abstract
Surface flashover characteristic of epoxy resin composite material in SF6/CF4 mix gas were studied through experimental method, and the influence of several key parameters were analyzed, such as gas pressure, SF6 mix ratio and voltage polarity. It is shown that, when the mix ratio of SF6 in the mixed gas is 40%, the flashover voltage of epoxy resin insulator can reach over 60% of the flashover voltage in SF6 with the same pressure. The synergistic effects in the needle-plate electrodes system have significant difference between positive and negative polarity. The synergistic effect for negative polarity is weaker than that in negative polarity. Comprehensive environmental requirements and surface flashover characteristics, the results provide a potential SF6 alternative for GIS equipment.
Subject
General Physics and Astronomy
Reference5 articles.
1. SF6 Insulation and its Appliacation to HV Equipment [J];Yanabu;IEEE Transactions on Eletrical Insulation,1991
2. Breakdown Characteristics of SF6/CF4 Mixtures in 25.8 kV [C];Hwang,2010
3. Monte Carlo Simulation of Electron Swarm Parameters in the SF6/CF4 gas mixtures [J];Liu;Japanese Journal of Applied Physics,2007
4. Study of the Dielectric Breakdown Properties of Hot SF6-CF4 Mixtures at 0.01~1.6 MPa [J];Li;Journal of Applied Physics,2013
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献