Author:
qixuan Song,zongtao Guo,zhenchuan He,tingyu Wang
Abstract
Abstract
To represent the temperature and degree of cure (DOC) more intuitively during the curing process of fiber-wound composite shell, wrote SDVINI, DISP, FILM, and HETVAL subroutines to characterize the fiber-wound composite curing process in ABAQUS. Comparing the temperature and DOC. The results indicate that the heat released from the resin curing process affects the internal temperature of the material, but the effect is small and can be ignored. The DOC on the surface of the fiber-wound shell during the curing process is slightly larger than that inside, but the difference is small and can be approximated as equal. And when the curing time is the same, the faster the heating rate, the faster the curing rate.
Subject
Computer Science Applications,History,Education
Reference6 articles.
1. Study on the effect of deflection on the quality of winding and forming of large aspect ratio composite shells[J];Wang;Composites Science and Engineering,2021
2. Optimization of the Composite Cure Process Based on the Thermo-Kinetic Model[J];Shevtsov;Advanced Materials Research,2012
3. Microscale viscoplastic analysis of unidirectional CFRP composites under the influence of curing process[J];Hui;Composite Structures,2021
4. Numerical simulation of residual stresses and curing deformation of composite materials and evaluation of the intrinsic structure model[J];Wei;Materials Guide,2019