Estimation of Internal Heat Flux on Pulsating Heat Pipes using Kalman Filter: Numerical and Experimental Results

Abstract

Abstract Pulsating Heat Pipes (PHPs) are two-phase passive thermal devices characterized by the presence of significant fluid oscillations inside the tubes that permit to fast and efficiently transfer heat from a hot region to a cold one. They are present in many engineering applications, e.g., electronics, sustainable energies, aerospace. They are very attractive due to their high heat removal capability, flexibility, and low manufacturing cost. Although they have been widely studied their working principles are still not fully understood. To better comprehend their thermal behaviour recent works presented different approaches to assess the internal heat flux in PHPs. However, all the adopted approaches are based on whole-domain techniques that require a higher computational cost compared with sequential estimations. Therefore, to allow heat flux estimation with lower computational effort, in this work a procedure based on the Kalman filter has been adopted. The heat flux has been estimated by solving the inverse heat conduction problem in the PHP’s wall adopting as input data the temperature measurement on the external surface of the pipe acquired by an infrared camera. Firstly, the procedure has been validated adopting synthetic data. Then, experimental data referring to actual operating conditions have been employed to estimate the internal heat flux. The Kalman filter has been adopted as technique to solve the classical instability intrinsically present in inverse problems. It is relatively simple to implement and requires only previous time information, requiring low computational costs. Moreover, the Kalman filter allows the real time estimation of the heat flux: assessing the heat flux on PHPs during operation could be a useful instrument to provide information about on-time working conditions and thus avoid any possible malfunctioning.