Simulation and Analysis of Harmonic High Voltage Filters for Wind Farm

Abstract

Abstract With the rapid development of the wind power industry, the total installed capacity of wind power has increased dramatically worldwide, and a large number of wind power installations need to be connected to the grid. In wind turbines, voltage flicker due to output power fluctuations caused by wind speed changes, and the application of a Voltage Source Converter (VSC) cause harmonic richness and other power quality problems to become more and more prominent. In this regard, the research is focused on the harmonic and reactive current distribution, impedance frequency characteristics, and voltage distortion rate of several offshore wind farm access systems, including the establishment of a harmonic current simulation model of the offshore wind farm delivery system, simulation analysis of network impedance frequency characteristics, simulation analysis of harmonic currents, and proposed a preferred filtering scheme. Taking into full consideration the characteristic harmonics of the wind farm, the system resonance generated by the submarine cable and the background harmonic level of the power grid, combined with the simulation results of the harmonic voltage, harmonic current, and network impedance frequency characteristics of each node, the technical solution of adding a direct-mounted high-voltage filtering device to the 220 kV bus at the metering station is proposed, which can destroy the system resonance conditions of the 3rd to 6th times of the submarine cable. Various wind farms and system operating conditions are able to form a stable harmonic absorption point to avoid the problem of harmonic amplification.