Study on piezo-electric flapping wing mechanism for bio-inspired micro aerial vehicles

Abstract

Abstract The Micro Aerial Vehicle (MAV) with a flapping wing configuration is much more efficient and capable of generating substantial lift at low flight speeds and has excellent maneuverability. Different motor-driven mechanisms have been developed to mimic this flapping motion, but these mechanisms introduced mechanical complexity and heavy weight to the system. Piezo-electric based mechanisms have been used to solve these problems, but provide very small flapping amplitudes within the size limitation of MAVs. So some kind of amplification mechanism is needed. In this paper, a flexible wing is created by attaching a polymer skin to a pair of carbon fiber reinforced plastic spars. This wing is connected by means of an elastic-element (EE) to a pair of piezoelectric unimorphs (piezofan). The motion from the piezofan to the wing is transferred through this EE. Simulation has been done by applying sinusoidal voltages of varying frequency to this piezofan and observations have been made for the flapping amplitude of the wing for different stiffness of the EE. It is observed that the amplitude of the peak flapping amplitude initially increases, attains a maximum value, then decreases again with an increase in the stiffness of the EE. It is also observed that as the EE stiffness increases, the corresponding peak of the flapping amplitude shifts towards higher frequency.