Interaction between microwave and dielectric surface discharge in vacuum and low-pressure gas

Abstract

Abstract The interaction between high-power microwave and dielectric surface discharge in vacuum and low-pressure gas is investigated by using an electromagnetic particle-in-cell–Monte Carlo collision model. Maxwell equations are solved by the finite-difference time-domain method combined with the boundary condition between the total and scattered field. The simulation results show that the transmission power loss is small and mainly attributed to the absorption of surface discharge, when the secondary electron multipactor reaches a steady state in vacuum. The simulated value of transmission power loss in vacuum is in good agreement with the experimental data. At a low pressure, the multipactor is the main source of electrons in the initial stage of discharge. After the multipactor reaches a steady state, the ionization leads to a significant increase in the number density of plasma near the dielectric surface. The absorbed power of plasma is greater than the reflected power in the initial stage of discharge, but with the increase of time, the latter becomes larger and even close to the power of incident wave. As the pressure increases, the transmission power decays faster due to the increase of ionization rate. When the microwave field near the dielectric surface decays significantly at a low pressure, the steady state of multipactor disappears, and the peak of plasma number density is near the surface, but not closest to the surface.